1.Model: YRK-002A Medical Infrared thermometer
2.Use Range: Body surface temperature, forehead temperature, Objects with thermal radiation
3.Age restriction: unlimited (can be used for infants over 3 months).
5.Appearance Size: 70 mm*38mm*143mm (Length x width x height)
6.Measured normal temperature
Oral: 35.5 ~ 37.5℃
Armpit: 34.7 ~ 37.3℃
Ear: 35.8 ~38℃
7. A person's body temperature changes at different times of the day and is also affected by other external conditions, such as age,
gender, skin tone and skin thickness
- 0-2 years old: 36.4 38.0℃
- 3-10 years old: 36.1~37.8℃
- 11-65 years: 35.9 ~37.6℃
- > 65 years: 35.8~37.5℃
In order to obtain stable and reliable temperature measurement data, please use the following steps to perform the necessary
checks before using a non-contact infrared thermometer
the forehead 1 to 5 cm (note any obstacles that may affect the measurement, such as hair, sweat etc. are removed).A temperature
of 37.59C indicates that the non-contact infrared thermometer can be used.If you get low readings, such as 36.4 degrees, 1.1 degrees
difference, you need to calibrate the non-contact infrared thermometer, plus the difference.To do this: press and hold the "mode" button
for two seconds, the screen displays F1, then press"mode" directly toenter F3, and then press the "+" button to plus the difference.
No Operation for 10 seconds after power-on, the display screen stays dormant, press and hold any one of "Menu" "+ " "-"
"Temperature trigger" to wake up
-Push the switch to "object temperature" mode to measure the temperature on object surface
-Push the switch to "body temperature" mode to measure the temperature on body surface
Press and hold the "Mode" button for 2 seconds, the screen displays F1, press "-" to select Celsius
Press and hold the "Mode" button for 2 seconds, the screen displays F1, press the "Mode" button twice to enter F2, and
then press the "+" button to increase the temperature value by 0.1℃.
- Calibration of non-contact infrared thermometer
- Press and hold the mode button for 2 seconds, F1 will be displayed on the screen, and press the mode button twice to enter F3
- Then press the "+" key to increase the difference 0.1℃
- "-"'Key decrease difference 0.1℃
Press and hold the "mode" key for 2 seconds, F1 will be displayed on the screen, press the "mode" key for 3 times (2 times) to
enter F4 (F3), press the "+"key to turn on the beep, press the "-"key to turn off the beep.
Press and hold the mode key until the power is turned off.